Allflex AFX-100 Manual do Utilizador descarregar pdf (Página 47)

Rev Australasia V2.3 12/04

47 47

Initial character is 000 = “#”

Delimiter character low is 10 = “,” (comma)

Tag Type Identifier is 00 = Allflex Style

Delimiter character high is 0 = “,” (comma)

Country Code is 0 = ISO 3166 Alphanumeric

Leading Zeroes is 1 = Yes

Raw Format is 0 = No

Command Prompt is 0 = No

(Not used is 0000)

Number Format is 0 = Decimal

(Not used is 0)

Send Duplicates is 0 = No

(Not used is 00)

Reserved Field is 0 = Off

Data Block Field is 0 = Off

Extended Code is 1 = On

3.2.6. Start Reading Cycle

Using requested reading the reader starts transponder detection for the defined reading

time. If the reader is already carrying out a transponder detection, the reader retriggers

read time. Using continuous reading, the reception of the command is ignored.

Command: R

Parameters: none

Readers Response:

wo/Command Prompt

w/Command Prompt

<LF>

See section 3.2.5. Serial ID-Code format settings.

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 53

Sem comentários

Allflex AFX-100 Manual do Utilizador Página 47