Allflex AFX-100 Manual do Utilizador descarregar pdf (Página 4)

Rev Australasia V2.3 12/04

4 4

Introduction

The Allflex Panel Reader comprises 2 parts, the antenna and the reader control electronics.

The reader section is the electronics that generates the signal used to excite (power up) the

RFID device (Radio Frequency ID). The device is also referred to as a transponder, electronic

ID (EID), as well as electronic eartag , etc. The reader also decodes the signal returned from

the RFID device. The transmission and receipt of signals between the reader and the RFID

device is done via the antenna. The antenna is a specifically designed coil of copper wire

enclosed within the plastic panel.

The Allflex reader is designed to

ead devices that meet international

standards ISO 11784 and 11785.

NLIS devices are ISO compliant

evices. The reader electronics are

housed inside a control box that

also includes an ammeter, indicator

lamps etc. The control box is

usually fastened to the antenna

using 2 x 5mm countersunk

stainless steel screws. Please see

Assembly Section.

A cable is supplied to provide

12volts DC to the control box. This

cable can be clearly identified

because it has alligator clamps on

one end. The power source should

be a standard automotive, truck or

marine battery. A 240 Volt – 12

volt linear power supply is also

available as an option.

Note : Only the approved linear

240volt supply should be used

because most 240 volt supplies will

generate electrical interference that

may cause the reader to perform

poorly. A second cable, the

The Allflex Medium Panel Reader

(600mm x 400mm)

communications cable, is also

supplied to join the control box to a

computer, scale head etc.

Each Panel Reader is factory tuned for optimum performance in an environment free from

metal structures. Typically, the system will operate without user adjustment in many

installations. Pre-drilled mounting holes in the black panel facilitate user installation, so that

total system setup is fast and easy.

This instruction guide provides the user / installer with information about mechanical

installation, electrical wiring, configuration, operation, and performance characteristics of the

Panel Readers.

1 2 3 4 5 6 7 8 9 ... 52 53

Comentários a estes Manuais

Sem comentários

Allflex AFX-100 Manual do Utilizador Página 4

Comentários a estes Manuais

Manuais e produtos relacionados com Leitores de códigos de barras Allflex AFX-100